| ADA-BUNDLE-MAN |
ADA Starter Kit for EGX-350 |
$4,100.00 |
| AS-10 |
Adhesive Sheet Hold-down System (pack of 10) |
$39.99 |
| BT-125-010 |
Burnish Tool, 1/8in shnkx4.5in lgthx.010in tip |
$17.49 |
| BT-125-015 |
Burnish Tool, 1/8in shnkx4.5in lgthx.015in tip |
$17.49 |
| BT-125-030 |
Burnish Tool, 1/8in shnkx4.5in lgthx.030in tip |
$17.49 |
| BT-171-015 |
Burnish Tool,11/64in shnkx6.5in lgthx.015in tip |
$23.99 |
| BT-171-030 |
Burnish Tool,11/64in shnkx6.5in lgthx.030in tip |
$23.99 |
| C2-125-010K |
Carb. Engr Cutter, .010in, 1/8in Shank, W/Knob |
$19.49 |
| C2-125-015K |
Carb. Engr Cutter, .015in, 1/8in Shank, W/Knob |
$19.49 |
| C2-125-030K |
Carb. Engr Cutter, .030in, 1/8in Shank, W/Knob |
$19.49 |
| C2-125-060K |
Carb. Engr Cutter, .060in, 1/8in Shank, W/Knob |
$19.49 |
| C2-125-090K |
Carb. Engr Cutter, .090in, 1/8in Shank, W/Knob |
$19.49 |
| C2-125-125K |
Carb. Engr Cutter, .125in, 1/8in Shank, W/Knob |
$19.49 |
| C2-125-DGK |
Diamond Gravers, non-rotary, 1/8in shank, W/knob |
$24.99 |
| C2-125-KNOB |
Threaded Brass Knob for 1/8in shank engr tools |
$4.29 |
| C2-171-010K |
Carb. Tip Engr Cutter, .010in 11/64inShnk W/Knob |
$25.99 |
| C2-171-015K |
Carb. Tip Engr Cutter, .015in 11/64inShnk W/Knob |
$25.99 |
| C2-171-030K |
Carb. Tip Engr Cutter, .030in 11/64inShnk W/Knob |
$25.99 |
| C2-171-060K |
Carb. Tip Engr Cutter, .060in 11/64inShnk W/Knob |
$25.99 |
| C2-171-090K |
Carb. Tip Engr Cutter, .090in 11/64inShnk W/Knob |
$25.99 |
| C2-171-125K |
Carb. Tip Engr Cutter, .125in 11/64inShnk W/Knob |
$25.99 |
| C2-171-171K |
Carb. Tip Engr Cutter, .171in 11/64inShnk W/Knob |
$25.99 |
| C2-171-DGK |
Diamond Gravers,non-rotary,11/64in shank, W/knob |
$27.99 |
| C2-171-KNOB |
Threaded Brass Knob for 11/64in shank Engr tools |
$4.29 |
| HS-171-005K |
Hi-Spd Steel Cutter 11/64inshnk 6.5in .005in tip |
$25.99 |
| HS-171-010K |
Hi-Spd Steel Cutter 11/64inshnk 6.5in .010in tip |
$25.99 |
| HS-171-015K |
Hi-Spd Steel Cutter 11/64inshnk 6.5in .015in tip |
$25.99 |
| HS-171-030K |
Hi-Spd Steel Cutter 11/64inshnk 6.5in .030in tip |
$25.99 |
| MV-2 |
Multipurpose Vise for EGX-300/350/360/400/600 |
$719.99 |
| PAR-125-060K |
0.060in Parallel Cutter, 1/8in Cut Depth |
$25.99 |
| PAR-171-060K |
0.060in Parallel Cutter,11/64in Shank,1/8in Depth |
$30.99 |
| US-CHIPSYS-C |
Chip Extraction Sys. UltraQuiet, 1/2hp w/Accumulator |
$719.99 |
| US-ENGRVLAB-9 |
EngraveLab Expert v9.0 for EGX |
$999.00 |
| US-FLTRBAG-A3 |
Filter bag (3-pk) for chip removal system |
$43.99 |
| US-TL125-KIT |
Engraving Tool Starter Kit, 1/8in tools with holder |
$113.99 |
| US-TL171-KIT |
Engraving Tool Starter Kit, 11/64in tools w/holder |
$133.99 |
| ZTT-35 |
T-Slot Table for EGX-350 |
$229.99 |
| ZV-23A |
Vacuum table, PNC-2300 |
$199.99 |
| ZV-23C |
Machine Vise, EGX-350 / EGX-300 |
$349.99 |
